What causes Aberrations?

Discussion forum for anything that doesn't fit elsewhere!
Post Reply
David Tipping
Posts: 243
Joined: Sat Jul 01, 2006 9:16 am
Location: Harrogate

What causes Aberrations?

Post by David Tipping »

With several photos of small copper aberrations recently posted on the site, it would be interesting if the experts could offer an explanation as to why aberrations occur. Are they just genetic freaks or are other factors at work?
Image
DJT
User avatar
Pete Eeles
Administrator & Stock Contributor
Administrator & Stock Contributor
Posts: 6790
Joined: Tue Jan 17, 2006 6:10 pm
Location: Thatcham, Berkshire
Contact:

Post by Pete Eeles »

I'm not an expert, but in very simple terms, the 2 factors are (I believe):

1. Genetics.
2. Environment.

E.B.Ford's book, "Butterflies", goes into these in some detail and makes a wonderful read!

Genetic variation can itself be broken down into several categories that I won't go into here. But a good example is the occurrence of the ab. arete in the Ringlet, where the rings are all but missing. Offspring can be guaranteed to be ab. arete if you choose the right parents!

Environmental variation is normally caused through extremes of temperature. For example, ab. semi-ichnusoides in the Small Tortoiseshell is caused by the temperature in the pupal state being excessively high. Conversely, ab. nigrina in the White Admiral is caused by the temperature in the pupal state being too low (for example, the larva may have pupated near the ground which then forms a "frost pocket").

Cheers,

- Pete
Post Reply

Return to “General”